Rockcote Quick Render Off White is a pre-blended cement render, which meets Australian Standards in combustibility for building materials and is fully compliant with AS1530.1. It exhibits minimal drying shrinkage and creates a reliable surface for over-coating with Rockcote acrylic textures and paints.

Rockcote Quick Render Off White 20Kg 

Rockcote Quick Render PM100 is a pre-blended polymer-modified cement render. It exhibits minimal drying shrinkage and is a reliable surface for over-coating with Rockcote acrylic textures and paints. Rockcote Quick Render PM100 has been formulated for use over expanded and extruded polystyrene walling systems and must be used as part of the Rockcote Reinforced Render (RRR) system.

Rockcote Quick Render PM100 20Kg 

Rockcote Rockbond 27 is an acrylic bonding agent designed to be added to the Rockcote Quick Render Range to increase adhesion and strength. Rockcote Rockbond 27 is also suitable to be used as a primer to reduce suction over highly absorbent substrates such as AAC.

Rockcote Rockbond 20 Litre 

Rockcote Quick Render PM100 High Build is a pre-blended polymer-modified cement render. It is simple to mix and easy to apply.  PM100 High Build has been formulated to build up and level undulating clay and cement block masonry and can be built out to 30mm.

Rockcote Quick Render High Build 12Kg 

Rockcote Quick Render Fine Grey is a pre-blended cement render. It exhibits minimal drying shrinkage and creates a reliable surface for over-coating with Rockcote acrylic textures and paints. Rockcote Quick Render Fine uses finer grade sands than standard pre-blend renders and can be used where a finer and smoother textured render finish is required.

Rockcote Quick Render Fine 20Kg 

Tough electric cement mixer for years of reliable service: bowl contains six heavy duty beaters, Polymer motor covers and 550 watt electric motor 

Cement Mixer 2.2 Cubic Electric 

Euromix™ Cream Render is a multipurpose render, suitable for use both as a base coat where finishing renders, texture coats, etc. or architectural finishes (like tiles) are to be applied and as a finish coat, where a high quality sponge finish is required. It can be applied by hand or by machine, in layers ranging from 2mm to 6mm at a time

Euromix Cream Render

Euromix™ LWHB (Light Weight, High Build) Render is a lightweight dry mix, full polymer, cement based render formulated for use where a high build finish is required. Euromix™ LWHB can be applied over most masonry and sheet and panel substrates, like, autoclaved aerated concrete (AAC), expanded polystyrene (EPS) and fibre cement (FC). Euromix™ LWHB Render is mixed with water only (no added Bond required). 

Euromix™ LWHB Render uses special lightweight fillers instead of polystyrene beads, allowing a smoother finish to be achieved.

Euromix High Build Render

Euromix FP Render is a ready-to-use dry mix, full polymer, cement based render formulated for application over sheet and panel substrates, like, autoclaved aerated concrete (AAC),expanded polystyrene (EPS), fibre cement (FC) and plaster based materials. Euromix FP Render is mixed with water only (no added Bond).When used as a base coat, Euromix FP Render can be applied up to 3-4 mm thick in one coat (over masonry and similar solid substrates).

Euromix™ FP Render is specifically designed to meet BCA (Building Code of Australia) standards for non-combustible building materials, and is fully compliant with AS1530.1.

Only add water for this Acryloc render. 

Euromix FP Render

Euromix™ NPS Keycoat (Scratcoat) Base Render is a dry mix, full polymer, cement based render formulated for application over non porous sheet and panel substrates, like, autoclaved aerated concrete (AAC), expanded polystyrene (EPS), fibre cement (FC) and plaster based materials. Euromix™ NPS Keycoat Base Render is mixed with water only (no added Bond). 

When used as a base coat, Euromix™ NPS Base Render can be applied up to 3-5 mm thick in one coat. Higher thicknesses can be achieved by applying multiple coats. 

Euromix NPS Keycoat Render

Euromix™ Render is a multipurpose render, suitable for use both as a base coat where finishing renders, texture coats, etc. or architectural finishes (like tiles) are to be applied and as a finish coat, where a high quality sponge finish is required. It can be applied by hand or by machine, in layers ranging from 2mm to 6mm at a time. 

Euromix™ Render is specifically designed to meet BCA (Building Code of Australia) standards for non-combustible building materials, and is fully compliant with AS1530.1

Contact us for more Acrylic Render solutions  

Euromix Render

Euromix™ Patch & Flex is a pre mixed polymer render that is suitable for use as a low build render coat and patching material in both external and internal applications over masonry and sheet substrates like fibre cement.

Euromix Patch Coarse

Euromix™ Patch Fine is an acrylic polymer, fine grain, topping and patching compound, suitable for use with most building substrates, in both internal and external applications.

Euromix Patch Fine

Euromix™ Sandstone Texture Coating contains a medium, round sand (0.9mm approx.). Designed to provide an attractive diamond sparkle effect appearance, that offers a durable, flexible and water repellent decorative finishing coating with excellent coverage over Euromix™ Renders and other substrates.

15L bucket provides up to 15 SQM coverage 

Euromix Sandstone Acrylic Texture Coating

Euromix™ Sand Finish is a premium quality, high build acrylic texture coat, manufactured with special graded sand, fillers and other chemicals. 
 
The typical grain size (the aggregate used to achieve the textured finish) for Sandfinish is @ 1.2mm diameter. 
 
Sand Finish is applied by trowel over suitably primed substrates to provide a decorative, protective coating with a stylish ‘traditional large grained sandstone’ appearance. 

15L bucket provides up to 14 SQM coverage 

Rendering

15 items