General purpose finishing nails available in 2, 3 and 4 inch. 

Bullet Head Nails 15Kg 

Steel Cone Nut 100mm 15/17 (40pcs bag). The Steel Cone Nut screws directly onto the Z Bar and is removed after the concrete is poured.

Also available in 75mm. 

Steel Cone Nut 100mm 

The Water Barrier is used as a water stop to prevent leakage through the tie hole. It is left in place after the concrete is poured.

Water Barrier 15/17

The Double Arm Wing Nut is used with 20/22mm Z Bar. 

Suits 20mm Z Bar - 50pcs bag 

Double Arm Wing Nut 20/22

The Hex Nut Coupler is designed to join 2 lengths of Z Bar - 200pcs bag. 

Also available in 100mm 

Hex Coupler 50mm 15/17

Combination washer and nut. The nut swivels on the washer providing extra adjustment.

25 pcs bag

Swivel Wing Nut & Plate Washer 

The Single Arm Wing Nut is a cast steel nut designed for quick installation and removal. 

Suits 15mm Z Bar - 50 pcs bag

Single Arm Wing Nut 15/17

Steel Plate Washer 125mm x 125mm x 10mm is fixed against the timber walers and held in place by the Single Arm Wing Nut.

Also available in 125 x 100 x 8mm and 125 x 100 x 10mm. 

Steel Plate Washer 125 x 125mm 

The Coil Tie Bolt is a coarse threaded bolt with a hexagonal head and fixed washer. 100 pcs box 

Also available in 300, 350, 405, 500 and 550mm. 


Coil Tie Bolt 250mm 

Coil Ties have 2 opposing wire struts which are welded to a steel coils at each end of the coil tie - 50pcs bag. 

Also available in 505 and 530mm. 

Coil Tie 480mm 

Monaco Global Frame Systems consist of 4 basic components ie frame, cross brace, base jack and u-jack. 

Light weight in construction Monaco Frame Systems offer fast erection and dismantle

Heavy  Duty H Frame System Set 

20 Angled Finishing Nails 

Plastic fillet mould is a flexible product which is used for creating a 45 degree chamfer in concrete. Fillet mould is nailed onto formwork to create a chamfer edge for panels or columns. 

Plastic Fillets 2.9m (Bundle of 50) 

Steel formworkframe available in different sizes 

Nordin Formwork Frames 

The Coil Tie Bolt is a coarse threaded bolt with a hexagonal head and fixed washer.

Coil Tie Bolts 300mm (100 Bag) 

The pressed Flange plate is a completion to the wing nut without flange. For panel formwork with steel profiles and timber wall formwork the square plate 120 x 120 is suitable.

Steel Z Bar Plates (25 per bag) 

These removable PVC cones are threaded onto the coil tie spring to complete the tie and seal the hole to prevent concrete leakage. 

Coil Tie Cones 35 (500 pcs) 

Steel strapping made from high tensile steel is supplied in long rolls and is easy to handle. 

Steel Strap Roll 200 metre 

The Coil Tie Threaded Rod has an identical thread and load capacity as the coil tie bolt (with a 12.5mm diameter). It screws into the coil tie spring to create an extension of various lengths between coil tie springs

Formwork

19 items